![]() Additionally, there are two function buttons to perform any function listed above on the LCD screen. There are arrow buttons and an Enter button to navigate the menus and options on the screen, however the Enter button is offset and would be a little more user-friendly if it were in the middle of the arrows like most other devices. The main unit has a rotary knob to move between the difference modes. We reviewed the CIQ-100 unit with hardware version 3 running with software version 1.6. Fluke Networks Removing the remote unit exposes the RJ11/45 and coax ports on top of the main unit. This could be a significant inconvenience for those using the unit often. There’s no included power supply because the unit isn’t rechargeable it takes 4 AA batteries. #TEST TONE NETWORK KIT UPDATE#There’s a Mini-B USB port on the bottom right side of the unit for transferring the test data to a PC and to update the unit’s software. The main unit is encased in a durable plastic cover, which also has a retractable stand on the back to prop up the unit on a surface. The detachable remote unit on top measures about 1.5 inches high, 3 inches wide, and 1.5 inches deep. The main unit measures about 7 inches high, 3.5 inches wide, and 2 inches deep. It’s more for strictly testing the cables.įluke Networks The Fluke Networks CIQ-100 tester with the remote unit attached on the top for storage. It doesn’t show switch info and network IP info like the two other solutions, but it’s not designed for that. It comes with a main unit to run standalone diagnostics and a remote unit for the cable testing. The Fluke Networks CIQ-100 ($1,385) is a qualification tester for copper media (twisted-pair, coax and audio) that can test speeds and troubleshoot cables. #TEST TONE NETWORK KIT ANDROID#The NETSCOUT unit is the most expensive of those tested but also has the most functionality, a touchscreen, and an Android OS. They give details on any connected switch, PoE capability and test for IP network/internet connectivity. ![]() The NETSCOUT LinkRunner G2 and SignalTEK NT units are the most similar in regards to what they test. It’s designed just for cable qualification, can test Ethernet and coax runs but has no fiber support. The Fluke Networks CIQ-100 is the most basic tester and least expensive of the three we reviewed. Plus all can blink the switch port LED lights to help identify the port you’re testing and send tones across the cable to physically locate the cable throughout its path using a separate tone probe. All three of these testers can check cable pairs and wiring, estimated cable lengths, and data rates. Here we take a look at three different network testers from three of the major players: Fluke Networks, NETSCOUT, and SignalTEK. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |